325-428-6222
325-428-6222
For many commercial buildings in West Texas, the roof has two big jobs: keep water out and help control heat. TPO roofing is a popular option for flat and low-slope roofs because it’s a single-ply membrane with heat-welded seams and a reflective surface. That makes it a practical choice for warehouses, retail centers, offices, churches, and industrial properties in Abilene, San Angelo, and nearby communities.
If you’re tired of patching an older system or dealing with leaks and high cooling demand a properly designed TPO system can provide a clean, watertight surface and improved energy performance, especially when paired with the right insulation and drainage plan.
TPO (thermoplastic polyolefin) is installed in large sheets over insulation and cover boards. The seams are hot-air welded, creating a continuous waterproof layer across the roof surface. Because the seams are welded (not just glued), they’re designed to be strong when the system is installed correctly and detailed properly around penetrations, edges, and transitions.
Reflective surface for heat control
Most TPO systems use a light-colored membrane that reflects sunlight and can help reduce roof surface temperatures, often supporting lower HVAC strain during long summer months.
Durability for everyday commercial use
TPO membranes are reinforced and designed to handle normal building movement and typical rooftop foot traffic (with walk pads where needed).
Good balance of cost and performance
TPO is widely used because it often offers a strong mix of upfront affordability, energy performance, and long-term maintainability.
Service life depends on the full system
A TPO roof’s lifespan is influenced by membrane thickness, insulation design, drainage, installation quality, and ongoing maintenance. With proper installation and care, many systems perform well for years.
TPO works best as part of a full roof assembly:
Actual savings vary by building size, insulation levels, HVAC design, and operating hours, but many owners choose TPO specifically for improved hot-weather performance.
TPO vs. EPDM
EPDM is a proven rubber membrane and can perform well, but darker membranes may absorb more heat unless coated or specified differently. TPO typically starts with a reflective surface built in.
TPO vs. Modified Bitumen
Modified bitumen can be very tough and is sometimes preferred for certain high-impact or specific-use cases. However, it may run hotter and can have different maintenance considerations than TPO.
TPO vs. Metal Roofing
Metal can be a long-term option, but on very low-slope commercial roofs it often requires more complex detailing and typically comes with a higher upfront cost. TPO is often chosen for large, flat decks where a seamless membrane approach makes sense.
No system is “best” for every building roof design, drainage, interior use, and budget all matter.
Many TPO systems perform well for years, but lifespan depends on membrane thickness, installation quality, drainage, foot traffic, and maintenance.
A reflective TPO membrane can help reduce roof surface temperatures and HVAC load, especially when paired with proper insulation. Results vary by building.
TPO is commonly used on flat and low-slope roofs for warehouses, retail, offices, churches, and many other commercial buildings. We’ll confirm whether it fits your roof design.
TPO often falls in the mid-range of commercial roofing options. The best value depends on performance goals, insulation needs, and long-term maintenance planning.
It depends on your home, budget, and goals. We’ll explain what performs well in heat, wind, and hail conditions and recommend options that fit your home and neighborhood.
Even a strong membrane roof needs basic care: